Hydrothermal Synthesis Reactor
Hydrothermal Synthesis Reactor
We also have 1-200L single layer,double layer,stainless steel,steel reactor can be choose.And can be customized according to your different requirements. If you have any need please contact us:
Email:Laura@xiaofanequip.com
Whatsapp:008615936214136
Wechat:BEIFAN-Laura
Phone:008615936214136
Product description
The hydrothermal synthesis reactor uses high-temperature and high-pressure aqueous solutions under certain temperature and pressure conditions to dissolve substances that are incompatible or difficult to dissolve under atmospheric conditions, or react to generate the dissolved products of the substance. By controlling the temperature difference of the solution, convection is generated to form an oversaturated state and grow crystals. It can be used for the preparation of nanomaterials and compound synthesis. In terms of crystal growth, it can also be used for small-dose synthesis reactions. It is a very commonly used small reactor in colleges and universities. Composition: stainless steel sleeve, kettle cover, polytetrafluoroethylene inner cup (lining), steel rod, stainless steel gasket (two pieces).
Features
Existing hydrothermal synthesis reactor models: 5ml, 25ml, 50ml, 100ml, 150ml, 200ml, 250ml300ml, 400ml, 500ml, 1000m, safety temperature 200℃, maximum pressure 3MPa.
Special models can be customized.
The thermal synthesis reactor is made of high-quality non-magnetic 0Cr18Ni9Ti stainless steel, with a polytetrafluoroethylene bushing, double-layer care, acid and alkali resistance, etc.
Details Image
Specification
Model | SR-25ml | SR-50ml | SR-100ml | SR-150ml | SR-200ml | SR-250ml | SR-500ml | SR-1000ml |
Capacity | 25ml | 50ml | 100ml | 150ml | 200ml | 250ml | 500ml | 1000ml |
Outer diameter of kettle cover | 57 | 65 | 75 | 92 | 100 | 102 | 120 | 170 |
Outer diameter of kettle body | 45 | 53 | 62 | 72 | 82 | 82 | 104 | 146 |
Height | 117 | 140 | 144 | 189 | 210 | 219 | 243 | 232 |
Outer diameter of lining | 33 | 39.5 | 48.5 | 55 | 61.5 | 64 | 84 | 119 |
Inner diameter of lining | Ф29xH68 | Ф38xH82 | Ф49.5xH128 | Ф68xH147 | Ф99xH131 | |||
Height of lining | 61.5 | 79 | 94 | 114 | 131 | 144 | 164 | 150 |
Product composition | Stainless steel kettle body, kettle cover, lining (PTFE/PPL), grip rod, stainless steel gasket (upper bottom plate, lower bottom plate). | |||||||
Material of kettle body | 304 stainless steel | |||||||
Material of lining | Complete set Standard PTFE (polytetrafluoroethylene) lining; optional PPL (para-polyphenylene) lining | |||||||
Working temperature | PTFE lining ≤220°C; | |||||||
PPL lining ≤280°C | ||||||||
Working pressure | ≤3Mpa | |||||||
Rate of temperature rise/fall | ≤5°C/min | |||||||
Amount of solvent added | Generally 60%-80% of the inner cup capacity | |||||||
Safety instructions | PTFE lining safety temperature: 200℃, PPL lining safety temperature 260℃. | |||||||
Maximum pressure: 3MPa | ||||||||
Net weight | 1kg | 1.5kg | 2.5kg | 4.5kg | 5kg | 5.5kg | 12kg | 16kg |
Dimensions | 55*110 | 65*130 | 85*150 | 100*170 | 110*200 | 110*220 | 160*250 | 210*260 |
Remarks | PPL is made by adding some synthetic substances to polytetrafluoroethylene. Its performance is better than that of pure polytetrafluoroethylene. | |||||||
PPL can be used continuously at 260C and has a maximum operating temperature of 290-300C | ||||||||
It has an extremely low friction coefficient, good wear resistance and excellent chemical stability. |
Prev
没有了
没有了
Next