Ethanol Centrifuge Extractor

We have 1-500L Ethanol Centrifuge Extractor can be choose.And can be customized according to your different requirements. If you have any need please contact us:

Email:Laura@xiaofanequip.com

Whatsapp:008615936214020

Wechat:BEIFAN-Laura

Phone:008615936214020

Description

The centrifuge is an all-in-one system that combines closed low-temperature alcohol extraction with mechanical centrifugation. It adopts PLC controller and LCD touch screen, has forward/reverse/dehydration functions, and can set time and cycle number, all of which can be programmed according to actual usage to achieve more efficient separation. The system has a single cycle running time of about 10-15 minutes, which ensures high-quality raw material extracts in a short time.

Working principle

Extraction Cycles:

The centrifugal extractor offers 3 program cycles: spray wash, agitation wash and spin dry cycle. Each program cycle can be run automatically or manually. The operator loads the ground plant material into a filter bag and places it into the centrifuge, which rotates at different speeds in the system while injecting alcohol at a controlled rate. The centrifuge can also be submerged and agitated in both directions to completely extract the plant's cost. After washing, the plant material is high-speed spin dried to remove 97% of the residue on the plant material, with an effective ingredient extraction rate of up to 98%. The alcohol wash can be recycled 2-3 times or used directly for further processing.

Application

Features

1. Plant extraction rate 98%

2. Alcohol removal rate 97%

3. The part in contact with the material is made of SUS304 or SUS316L, the surface is treated with sanitary grade, no dead corners, and easy to clean.

4. The inlet and outlet are made of sanitary quick clamps with valves.

5. All seals are sealed with polytetrafluoroethylene or fluororubber, and the main shaft is a double-layer fluorine seal water seal/oil seal.

6. 220V three-phase explosion-proof motor (220V single-phase optional), PLC and touch screen control, frequency conversion control cabinet.

7. Equipped with two inlet/outlet pipes, a vacuum port with valve, a drain port, and the inlet and outlet of the circulating cooler.

8. The cylinder is jacketed and can be connected to the circulating cooler for cooling.

9. The base is equipped with four lifting rings for easy loading and unloading.

10. Equipped with 10m cable and control cable, it can be used directly after electrical connection.

Details Image

Specification